基礎底座模具制造是按照不同基礎底座構件而定的，從實際使用的基礎底座模具來看，以風力發電基礎使用的模具量較大，而且每種模具都有固定的圖紙要求，需要采用拆分模式進行定做生產�；A底座模具特點與作用是我們用來生產基礎底座的一種模板，規格比較多樣，有尺寸在一米以下的方形模具，也有規格在兩米左右的圓形模具。一般都是使用鋼板進行模具的制作，然后通過澆筑混凝土預制生產的方式生產出我們工程中所需要的混凝土預制塊。
The mold manufacturing of foundation base is determined according to different foundation base components. From the actual foundation base molds, the amount of molds used for wind power generation foundation is large, and each mold has fixed drawing requirements, so it is necessary to adopt split mode for customized production. The characteristics and function of the foundation base mold is a kind of template we use to produce the foundation base. There are various specifications, including square molds with a size of less than one meter and circular molds with a size of about two meters. Generally, steel plates are used to make molds, and then concrete precast blocks required in our project are produced by pouring concrete.
制作基礎底座模具的鋼板采用了四到六毫米之間的鋼板進行操作，通過電焊機等加工機器的使用可以很快的對鋼板進行切割以及焊接、打磨等多道加工工序。如果是規模較大的模具，我們還可以將其設置成拼接生產的樣式，然后使用螺絲或者是卡扣等固定件對模具進行固定�；A底座鋼模具在我們的生活中應用十分的廣，像我們身邊比較常見的電線桿以及路燈、橋梁，還有在內蒙、張家口等草原比較多適合建設風力發電機的地帶需求量很大。我們廠在進行生產的時候，使用鈑金鋼等多種加工工藝進行制作，根據設計圖紙上的設計要求將鋼板進行剪切，并且為了有效的固定好鋼板，我們還需要使用不同厚度的筋條進行固定。整個工藝比較復雜，但是也使我們的基礎底座鋼模具擁有更好的使用效果，產品質量更好。
The steel plate for making the foundation base mold is operated with a steel plate between 4 and 6 mm. Through the use of processing machines such as electric welding machine, the steel plate can be quickly cut, welded, polished and other processing processes. If it is a large-scale mold, we can also set it to the style of splicing production, and then fix the mold with fasteners such as screws or buckles. The steel mold of foundation base is widely used in our life, such as the common electric poles, street lamps and bridges around us, and there are many grasslands in Inner Mongolia and Zhangjiakou, which are suitable for the construction of wind turbines. During production, our factory uses a variety of processing processes such as sheet steel to make the steel plate. The steel plate is cut according to the design requirements on the design drawings. In order to effectively fix the steel plate, we also need to use ribs of different thickness for fixation. The whole process is complex, but it also makes our foundation steel mold have better use effect and better product quality.
基礎底座模具的脫模方法都是不大相同的，這是由于模具的樣式規格大多都是不一樣的，像化糞池模具這種套式模具就需要先安裝外模再安裝內模，脫模的時候也是先拆卸內模再拆卸外模。像其他現澆作業的鋼模具不大一樣，基礎底座模具只有外模的存在，這樣在拆卸的時候就需要先拆卸外模再拆卸內模，防止沒有承重板導致混凝土制塊坍塌。風機基礎底座模具在工程中非常容易進行操作，并且因為其整體使用了很好板材進行生產，所以其擁有較長的壽命，能夠在工程中很好的進行使用。為了能夠加快模具的脫模效果，可以在鋼板上涂刷上專門的脫模劑，從而使模具能夠加快速度，循環進行使用，模具的成本較低，生產的時候比較省時省力，可以很好的降低成本，更好的保證模具的產品質量
The demoulding methods of foundation base molds are not the same, because most of the mold styles and specifications are different. For sleeve molds such as septic tank molds, it is necessary to install the outer mold first and then the inner mold. When demoulding, it is also necessary to remove the inner mold first and then the outer mold. Unlike other cast-in-situ steel molds, the foundation base molds only have external molds. Therefore, when dismantling, it is necessary to dismantle the external molds first and then the internal molds, so as to prevent the collapse of concrete blocks due to the absence of bearing plates. The fan foundation base mold is very easy to operate in the project, and because it uses good plates for production as a whole, it has a long service life and can be used well in the project. In order to speed up the demoulding effect of the mold, a special release agent can be painted on the steel plate, so that the mold can be accelerated and recycled. The cost of the mold is low. It saves time and effort in production, which can well reduce the cost and better ensure the product quality of the mold
打印