防撞墻模具就是要求在制作模板的時候嚴格參照圖紙要求的具體數據進行下料、裁剪、焊接等步驟，選擇防撞墻模具的攻略非常多，在鋼板厚度、模具價格、使用次數等幾個方面。防撞墻模具選擇攻略是按照對混凝土防撞墻的使用而言。首先是對鋼板厚度的選擇，按照不同規格以及形狀的防撞墻，鋼板厚度直接影響做工以及模具價格，但是根據使用時間和次數來說，需要在3毫米面板和4毫米面板上作出選擇；其次是模具價格，影響模具價格的因素非常多，廠家生產實力、板材、模具數量等等；模具使用次數受到價格和鋼板厚度雙重影響，所以不要一味的針對價格高低而去選擇生產該模具的廠家，價格高低只是體現了防撞墻模板的使用價值。
The anti-collision wall mold is required to carry out blanking, cutting, welding and other steps in strict accordance with the specific data required by the drawings when making the template. There are many strategies for selecting the anti-collision wall mold, such as steel plate thickness, mold price, use times and so on. The selection strategy of anti-collision wall mold is based on the use of concrete anti-collision wall. The first is the selection of steel plate thickness. According to the anti-collision wall of different specifications and shapes, the steel plate thickness directly affects the workmanship and mold price, but according to the use time and times, it is necessary to choose between 3mm panel and 4mm panel; The second is the mold price. There are many factors affecting the mold price, such as the manufacturer's production strength, plate, mold quantity, etc; The use times of the mold are affected by the price and the thickness of the steel plate, so don't blindly choose the manufacturer of the mold according to the price. The price only reflects the use value of the anti-collision wall template.
防撞墻模具操作輕松便捷，下面會講述應該如何科學使用，并澆注砂漿完成示警墩預制品的脫模。首先我們要清楚防撞墻鋼模板的結構都有哪些，常規的筋板與面板將會構成一整套的模具，整套的模具會事先進行組裝，將多部分的模具拼接在一起，只留有一個灌漿口進行操作，隨后要將模具中刷油才可以開始操作，沒有刷油的模具直接灌漿的話模具容易出現生銹的現象，后續的養護也十分復雜。在防撞墻鋼模板中刷油后才可以填入混凝土，經過五分鐘左右的震動后停止，觀察排氣狀況如何�；炷练雷矇δ０宸雷矇δ＞邔τ诃h保事業來說是一種無可非議的環保型產品，該模具可大大降低排放標準，凈化了環境，具有實用價值。
The operation of the anti-collision wall mold is easy and convenient. The following will describe how to use it scientifically and pour mortar to complete the demoulding of the warning pier pre-products. First of all, we need to know the structure of the steel formwork of the anti-collision wall. The conventional rib plate and panel will form a complete set of molds. The complete set of molds will be assembled in advance. Many molds will be spliced together, leaving only one grouting opening for operation. Then, the operation can be started only after painting the mold, If the mold without oil painting is grouted directly, the mold is prone to rust, and the subsequent maintenance is also very complex. The concrete can be filled only after painting the steel formwork of the anti-collision wall. Stop after about five minutes of vibration and observe the exhaust condition. The concrete anti-collision wall formwork anti-collision wall mold is an indisputable environmental protection product for the cause of environmental protection. The mold can greatly reduce the emission standard, purify the environment and has practical value.
打印